Custom Event Setup

×

Click on the elements you want to track as custom events. Selected elements will appear in the list below.

Selected Elements (0)

    Product details

      Inkbird Heating Cooling Thermostat ITC-308S
      ITC-308S Applications Specs

      ITC-308S Temp Settings

      ITC-308S Heating Cooling Thermostat Features

      Main features:

      • Plug and play design, easy to use
      • Dual relay output, be able to connect with refrigeration and heating equipment at the same time
      • Support reading with Centigrade or Fahrenheit unit
      • Maximum output load: 10A, 1100W~2400W(110V~240V)
      • Dual display window, be able to display measured temperature and set temperature at the same time
      • Temperature calibration
      • Compressor delay protection for refrigeration control
      • High and low temperature alarms are available
      • Over-temperature and sensor fault alarm
      • Heating/cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change

       

      Specification

      • Temperature Control Range : -50~99 °C / -58~210 ° F 
      • Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) 
      • Temperature Control Mode :On/Off Control, Heating and Cooling 
      • Input Power: 100 ~240VAC, 50Hz/60Hz 
      • Temperature Control Output: Max. 10A, 100V ~240V AC 
      • Buzzer Alarm: High and Low Temperature Alarm 
      • Sensor Type: NTC sensor (Including) 
      • Sensor Length: 2m / 6.56ft 
      • Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) 
      • Socket: 85x42x24mm(3.3x1.7x1inch) 
      • Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F 
      • Storage Temperature: -20~ 60 ° C / -4~ 140 ° F 
      • Humidity 20~85% (No Condensate) 
      • Warranty: 1 Year 

       

      Package Content:

      • 1x ITC-308S Temperature Controller; 
      • 1x 1.97" Female to Male NTC Sensor 
      • 1x User Manual

      Overall rating: 5.0 / 5 from 8 reviews.

      AI Generated Review Summary

      Summary topics

      Review topics: [].

      Review highlights

      Reviews

      Great product

      "It's been a lot of help to stop cabling the itc ones, this just plug and play, just great!!"

      Julius B. (5/5)

      Controller ITC-308S

      "Great service"

      Stan L. (5/5)

      Replacement Unit.

      "Replaced older existing unit."

      Mark M. (5/5)

      Temperature Controller ITC-308S.

      "Good quality item like all other Inkbird items I previously bought. Received in a timely manner"

      Cornel W. (5/5)

      Great product!

      "Use these to keep my refrigerators and freezers at a constant 40 degrees. The original thermostat had too great a variation."

      Paul B. (5/5)

      Perfect

      "is works perfectly as should be. I am very glad with it."

      Emerson S. (5/5)

      What I needed a long time ago!

      "Living in the northern most part of New Hampshire, I was having problems with my walk in cooler freezing up. Read about the Inkbird 308s and gave it a shot. It has been a week of use in single digit temps and the walking has held steady at 36* F! Must have unit for the home butcher!"

      Benjamin S. (5/5)

      Have bought another model previously

      "Have bought another model previously and after 2+ years it is still going strong. Reliable and accurate thing. Use it in reef aquarium but sealed it in silicone to be safe even it did not rust. This model with an interchangeable and water resistant probe is even better since in the event of probe damage one can easily change it, no soldering needed. Don't use this new model at the moment, but tested it and it is working as intended. Bought another brand's unit and it was faulty and of poor quality, so had to refund it. But that one had a slightly prettier screen. Went for the looks and regretted it! Don't make the same mistake- buy Inkbird instead!!!"

      Novella M. (5/5)

      Q&A